Innotex/Klipper
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
153698c90d1fd81c8686a4b6c6a0d4d7d6a68904
Klipper/src/stm32
History
Michael Kurz ab979a52cf stm32: Add support for STM32F1 I2C1 alternate pin mapping (#4012) 
This adds support for the alternate pin mapping of
I2C1 on PB8/9 in STM32F1 devices

Signed-off-by: Michael Kurz <michi.kurz@gmail.com>
2021-03-02 23:02:20 -05:00
..
adc.c
stm32: Support for STM32F401 (#3853)
2021-01-31 19:41:53 -05:00
can.c
stm32: Add STM32F429 variant (#3926)
2021-02-18 20:12:32 -05:00
chipid.c
stm32: Enable chipid as usb serial number
2019-11-25 19:30:31 -05:00
gpio.c
stm32: Define PGx pins on stm32f103
2019-11-02 11:35:27 -04:00
gpio.h
stm32: Add support for SPI1 and SPI3 busses
2019-08-31 19:55:30 -04:00
i2c.c
stm32: Add support for STM32F1 I2C1 alternate pin mapping (#4012)
2021-03-02 23:02:20 -05:00
internal.h
stm32: Initial support for stm32f2 (#3001)
2020-06-23 10:52:15 -04:00
Kconfig
stm32: Add support for 48KiB bootloaders
2021-02-20 09:37:43 -05:00
Makefile
canbus: Move high-level CAN code to new src/generic/canbus.c
2021-02-02 15:24:11 -05:00
serial.c
stm32: Fix typo that broke selection of alternate serial port pin
2020-02-09 12:01:43 -05:00
spi.c
stm32: Add support for spi bus on stm32f407 pins PI2,PI3,PI1
2021-02-12 17:32:54 -05:00
stm32f0_adc.c
stm32: Support reading chip based temperature sensor on stm32f0
2020-10-29 11:55:06 -04:00
stm32f0_i2c.c
stm32f0: Initial support for i2c on stm32f0
2019-11-14 15:54:28 -05:00
stm32f0_serial.c
stm32: Adding support for STM32F031x6 (#3871)
2021-02-03 12:23:17 -05:00
stm32f0_timer.c
stm32: Initial support for stm32f070
2019-10-23 21:19:03 -04:00
stm32f0.c
stm32: Adding support for STM32F031x6 (#3871)
2021-02-03 12:23:17 -05:00
stm32f1.c
stm32: Add support for STM32F1 I2C1 alternate pin mapping (#4012)
2021-03-02 23:02:20 -05:00
stm32f4.c
stm32: Optimize stm32f401 peripheral clock
2021-02-19 12:19:32 -05:00
usbfs.c
stm32: Initial support for stm32f070
2019-10-23 21:19:03 -04:00
usbotg.c
stm32: Wait for setup complete to enable ep0 rx in usbotg.c
2020-05-03 12:00:47 -04:00
watchdog.c
…