Innotex/Klipper
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

sam4e8e: Add the SAM4e8e port

Browse Source 
This can be flashed to e.g. the duet wifi using bossac. It requires a
later version as is currently included in the klipper repo (1.8
vs. 1.2). Comms are currently via UART0 only, USB serial is still TBD

Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
This commit is contained in:
Florian Heilmann
2018-08-07 01:03:54 +02:00
committed by Kevin O'Connor
parent d15c106288
commit 64e6d85898
16 changed files with 858 additions and 5 deletions
Download Patch File Download Diff File Expand all files Collapse all files

59
src/sam4e8e/serial.c Normal file
View File

@@ -0,0 +1,59 @@
// SAM4e8e serial port
//
// Copyright (C) 2018 Florian Heilmann <Florian.Heilmann@gmx.net>
//
// This file may be distributed under the terms of the GNU GPLv3 license.
// CMSIS
#include "sam.h" // UART
// Klipper
#include "autoconf.h" // CONFIG_SERIAL_BAUD
#include "board/gpio.h" // gpio_peripheral
#include "board/serial_irq.h" // serial_rx_data
#include "sched.h" // DECL_INIT
void
serial_init(void)
{
gpio_set_peripheral('A', PIO_PA9A_URXD0, 'A', 1);
gpio_set_peripheral('A', PIO_PA10A_UTXD0, 'A', 0);
// Reset uart
PMC->PMC_PCER0 = 1 << ID_UART0;
UART0->UART_PTCR = UART_PTCR_RXTDIS | UART_PTCR_TXTDIS;
UART0->UART_CR = UART_CR_RSTRX | UART_CR_RSTTX | UART_CR_RXDIS | UART_CR_TXDIS;
UART0->UART_IDR = 0xFFFFFFFF;
// Enable uart
UART0->UART_MR = (US_MR_CHRL_8_BIT | US_MR_NBSTOP_1_BIT | UART_MR_PAR_NO
| UART_MR_CHMODE_NORMAL);
UART0->UART_BRGR = SystemCoreClock / (16 * CONFIG_SERIAL_BAUD);
UART0->UART_IER = UART_IER_RXRDY;
NVIC_EnableIRQ(UART0_IRQn);
NVIC_SetPriority(UART0_IRQn, 0);
UART0->UART_CR = UART_CR_RXEN | UART_CR_TXEN;
}
DECL_INIT(serial_init);
void __visible
UART0_Handler(void)
{
uint32_t status = UART0->UART_SR;
if (status & UART_SR_RXRDY)
serial_rx_byte(UART0->UART_RHR);
if (status & UART_SR_TXRDY) {
uint8_t data;
int ret = serial_get_tx_byte(&data);
if (ret)
UART0->UART_IDR = UART_IDR_TXRDY;
else
UART0->UART_THR = data;
}
}
void
serial_enable_tx_irq(void)
{
UART0->UART_IER = UART_IDR_TXRDY;
}